: software & firmware updates

This firmware is a system software program for your DJ PLAYER.
Please update the firmware to the latest version to enhance the product's performance.

Please read Firmware Update Guide to check the firmware version of your DJ PLAYER and how to update the firmware.

• Playback sometimes stopped when playing a track with a length over 10 minutes when using TRAKTOR via USB.
• Some USB 3.0 devices were not recognised.

File Name：CDJ-850v113.zip
File Size：1.43 MB (1,507,861 bytes)

The following file will be extracted.
   C850MAIN.UPD (2,156,300 bytes)

For connecting multiple players to a Mac, as well as designating them as audio output device targets for your supporting DJ software, you will first need to set up an aggregated device.
This can normally be accomplished by using Audio MIDI Setup, a utility which comes bundled with Mac OS X.
We have provided an alternative program called CDJ/XDJ Aggregator, which simplifies this procedure to a single click.

Please also download the instruction manual and read through it before installing the tool software.

This tool is not necessary for Windows users because Windows CDJ/XDJ drivers support audio output to multiple players.

Please be sure to install and use the Windows drivers corresponding to your player.

• CDJ-3000
• CDJ-TOUR1
• CDJ-2000NXS2
• CDJ-2000NXS
• CDJ-900NXS
• CDJ-850
• CDJ-350
• CDJ-2000
• CDJ-900
• CDJ-400
• XDJ-1000MK2
• XDJ-1000
• XDJ-700

AUDIO DRIVER FOR WINDOWS

These drivers will allow you to connect your CDJ / XDJ to a computer.
Please read the Manual for the installation procedure.

Unzip the downloaded file "Pioneer_CDJXDJ_Driver_***.exe.zip". This file will appear: Pioneer_CDJXDJ_Driver_***.exe

• Support for CDJ-3000.

• CDJ-3000
• CDJ-TOUR1
• CDJ-2000NXS2
• CDJ-2000NXS
• CDJ-900NXS
• CDJ-850
• CDJ-350
• CDJ-2000
• CDJ-900
• CDJ-400
• XDJ-1000MK2
• XDJ-1000
• XDJ-700

This driver software is support Windows10 only(Not support Windows 8.1).

Mac OS users:
You don't have to install this driver software. Mac OS standard driver will be automatically installed when your CDJ/XDJ is connected to your Mac with a USB cable.