- Q1 When recording on USB devices, the recording level stays constant even when [MASTER LEVEL] is adjusted. Is this by design?
To adjust the recording level,
① For CD/PHONO inputs
Adjust with the TRIM control and channel fader.
Note, however, that if the TRIM control is turned clockwise so that the channel level indicator lights red, the input level is too high and the sound may be distorted.
② For MIC/AUX inputs
Adjust with the LEVEL control.Net Number : 20
- Q2 The power turns off even though I haven't done anything.
This unit is equipped with a "standby function" that turns the power off as an energy-saving measure when no operation has been performed for a specific amount of time.
Upon factory shipment, this standby mode is set to 20 minutes.
This setting can be changed at UTILITY.
① Set the power to the standby mode.
② Press the power button while pressing the two SEARCH buttons.
③ Use the search buttons to set the time after which the power will be set to the standby mode.
The master level indicators light to indicate the set time.
-2 indicators lit: 20 minutes
-4 indicators lit: 40 minutes
-6 indicators lit: 60 minutes
-No indicators lit: Off (power does not turn off automatically)
④ Press the power button for at least 2 seconds to complete the setting.Net Number : 21